Configuring iLOM to use DHCP

Okt 28

Hardware Add comments

Once you have setup a fix IP address for your iLOM SP and you have no more access to the web interface it is necessary to configure iLOM to use dhcp from the serial console.

First connect to the serial port of your SP with a kermit, HyperTerminal or your preferred application. The connection parameters are: 8N1 (eight data bits, no parity, no stop bit), 9600 baud, CTS/RTS (disable hardware flow control). Enter the following commands for setting up the iLOM network to use dhcp.

Sun(TM) Integrated Lights Out Manager
 
Version 2.0.2.16
 
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
 
> cd /SP/network
/SP/network
 
> set pendingipdiscovery=dhcp
Set 'pendingipdiscovery' to 'dhcp'
 
> set commitpending=true
 
> exit

Share and Enjoy: Diese Icons verlinken auf Bookmark Dienste bei denen Nutzer neue Inhalte finden und mit anderen teilen können.